Up & Over Garage Doors
All Up & Over Garage Doors
- All Novoferm up and over garage doors are retractable in operation with multi-sprung spring assisted action for smooth running. The door slides up and over into the garage (horizontally on tracks), providing safe and very reliable operation.
- All Novoferm up and over garage doors are supplied pre-hung in a factory-finished steel frame, which also makes installation very simple, eliminating the need for a timber frame which can warp or rot over time.
- VivoPort II automatic doors are supplied with two remote control handsets and integral manual release as standard.
Steel Up & Over Garage Doors
- Steel up and over garage doors are supplied in either white (RAL 9016) or brown (RAL 8014) factory pre-finished with a matching steel frame and standard black 'D' handle
- Matching steel side doors are supplied in white (RAL 9016) or brown (RAL 8014) factory pre-finished with a matching tubular steel frame and standard black lever handle
- Open for infill doors have a maximum infill weight of 7kg/m2
Timber Up & Over Garage Doors
- Timber infill doors are constructed as an infill to fit the open-for-infill up and over door chassis. This gives the doors their rigid and durable construction. The chassis and outer frame are supplied polyester powder coated in brown (RAL 8014). A black 'D' handle is fitted as standard
- The styles: Jacobean, Tudor, Windsor and Davenport are Cedar facing, glued and fixed to exterior quality plywood
- The Alderley and Hale doors are constructed from 20mm solid thick moulded Cedar panels
- The other solid Cedar doors (Cheadle, Heath, Gatley, Bramhall and Poynton) are 12mm tongue and grooved boards constructed as an infill
- Matching timber side doors are supplied in brown (RAL 8014) factory pre-finished door chassis and matching steel frame with infill styles as above and a standard black lever handle
- Cedar is organically grown from replenishable sources with natural colour and grain variations - this is a feature of Cedar. We make every effort to harmonise the effect, where possible, by hand matching the component parts used in construction. Please note that a uniform grain pattern cannot be guaranteed. Please tell us if you require matching pairs and we will endeavour to match both doors.
- All our timber doors are supplied with a dip immersion coat of Sikkens WP560, colour ref 006-Light Oak. This coating is for temporary protection only. If purchased in this temporary finish, please ensure that a full specification of finishing coats are applied immediately before or after installation to all exposed surfaces - inside and out - with a Sikkens or similar finishing coat system. A fully finished option is avaiable (see up and over door options)
